亚盘有哪些软件alpha6810s energy saver works intelligently in the injection cycles. the motor speed is controlled synchronously with the tracking of pressure and flow, which is equivalent to using a variable pump instead of the actual fixed-displacement pump. and the original hydraulic system works adaptively to the machine running power, eliminating the energy loss caused by high-pressure overflow in previous system. furthermore, the ac drive makes the motor stop running under non-action state (mainly the cooling state) thus enlarges the energy saving space and reduces the running noise as well as machine wear and temperature-rise. this series of inverter perfectly combines the injection machine and the asynchronous servo controller’s advantages of rapid dynamic response and strong instantaneous over-current ability. because of this, the energy saving of oil pump is 25%~70%, and hydraulic oil extends its lifetime to 3 years.
亚盘有哪些软件strong over-load capacity; protection to 250% instantaneous over-current
亚盘有哪些软件three analog inputs (0~1a, 0~10v); multiple selection modes
亚盘有哪些软件rapid dynamic response ensures the production efficiency.
built-in switching of bypass (cabinet integration); more reliable running
bypass switching control mode doesn’t need the modification of injection related parameters after switching.
亚盘有哪些软件soft start and tracking running reduce machine wear and extend lifetime of injection machine.
亚盘有哪些软件pass emc testing; no interference to original injection control system
easy installation and debugging, free of alternation to original oil pump circuit
retain the original injection control mode and its oil circuit
optimal curve runs adaptively to the properties of injection oil circuit
keep original injection techniques and its work efficiency
runs synchronously with injection machine to extend machine lifetime without adjustment
user-defined control curves satisfy all kinds of injection techniques.
亚盘有哪些软件direct proportional valve signal input; no transfer process
energy saving rate varies among 20%~70% in different injection techniques.
亚盘有哪些软件magnificent reduced heating; stable oil temperature; save higher than 30% cooling water
extend sealants lifetime; reduce stoppage for maintenance; save large amount of maintenance fee
亚盘有哪些软件the energy saver is used together with injection molding machines.
Technical Specifications of ALPHA6810S
|Power Range||380V ±20% three phases: from 11 to 55kW|
|Rated Input Voltage and Frequency||Three phases: 50/60Hz|
|Allowable Input Voltage Range||380V three phases: from 304 to 456V, Voltage unbalance rate of less than 3%, Frequency fluctuation of below ±5%|
|Rated Output Voltage||From 0 to rated input voltage|
|Max. Overload Current||150% for one minute, 180% for 20 seconds, 250% for reaching the instantaneous peak value|
|Control Method||V/F control, Open loop vector control|
|Frequency Range||From 0.00 to 400.00Hz|
|Frequency Accuracy||Digital command ± 0.01% (from -10℃ to +40℃)
Simulation command ± 0.01% (25℃ ± 10℃)
|Preset Frequency Resolution||Digital command 0.01Hz
Simulation command 1/1000 of the maximum frequency
|Output Frequency Resolution||0.01Hz|
|Preset Frequency Signal||From 0 to 10V, from 0 to 20mA|
|Acceleration-Deceleration Time||From 0.1 to 3600 seconds (The acceleration and deceleration time are set independently.)|
|Braking Torque||The additional braking resistance can reach 125%.|
|Voltage-Frequency Characteristic||4 fixed V/F characteristics are selectable, and any V/F characteristic can be preset. The V/F control with PG is attainable.|
|Protective Functions||Over-voltage, under-voltage, current limit, over-current, overload, electronic thermal relay, overheating, over-voltage stall, load short circuit, grounding, under-voltage protection, input phase loss, output phase loss, short circuit to ground, interphase short circuit, motor overload protection, and more|
|Ambient Temperature||From -10℃ to +40℃|
|Humidity||From 5 to 95% RH (No condensation)|
|Storage Temperature||From -40℃ to +70℃|
|Service Place||Indoor (without any corrosive gas)|
|Installation Site||The altitude is at most 1,000m. There is not any dust, corrosive gas, or direct solar radiation.|
|Vibration||Less than 5.9m/s2 (0.6g)|
|Cooling Method||Natural cooling or forced air cooling|
ALPHA6810S Selection Table
|Voltage Classes||Model||Motor Power (kW)||Rated Output Current (A)|
|380V Three Phases||6810S-3011ZB||11||25|
Overall Dimension of ALPHA6810S Series Energy Saver for Injection Molding Machine
|A: Energy Saving
|Model||W (mm)||H (mm)||D (mm)|
Injection Molding Machine Power Saver | Energy Saving Unit | Power Saving Cabinet